Skeleton Tracking logs in response to dev request


#1

Um…
I dont know what happened but it’s there now.

I’m going to blame windows 10.
Probably just needed a good restart with the device plugged in. I think I tend to start it with the device not, as i dont have room to safely just keep it out and the program takes a moment to get going.

Might not be detecting it then.
Here is the log though.
This time after I started it it actually crashed and I had to reopen it. When I did the tab for the OpenNI 1 was there. And it suddenly makes sense how to scale and off set and all that per my other forum post.

Thanks!

09:14:09: QProcess: Destroyed while process ("tasklist") is still running.
09:14:09: QProcess: Destroyed while process ("C:\Program Files\Delicode\Delicode NI mate 2\Delicode_Sensor_OpenNI\Delicode_Sensor_OpenNI.exe") is still running.
09:14:13: Qt WebEngine ICU data not found at D:/Qt57/5.7/msvc2013_64/resources. Trying parent directory…
09:14:13: Qt WebEngine ICU data not found at D:/Qt57/5.7/msvc2013_64. Trying application directory…
09:14:13: Installed Qt WebEngine locales directory not found at location D:/Qt57/5.7/msvc2013_64/translations\qtwebengine_locales. Trying application directory…
09:14:13: Qt WebEngine resources not found at D:/Qt57/5.7/msvc2013_64/resources. Trying parent directory…
09:14:13: Qt WebEngine resources not found at D:/Qt57/5.7/msvc2013_64. Trying application directory…
09:14:13: device status is 1
09:14:13: family 1
09:14:14: Spout server 1.1 initialized in DX11 mode.
09:14:14: Spout server 1.2 initialized in DX11 mode.
09:14:14: Starting input 1: Kinect for Xbox
09:14:14: QOpenGLWidget: Already initialized, setting the format has no effect
09:14:14: Input 1: Creating QApplication
09:14:14: Input 1: Using shared memory for data
09:14:14: Input 1: Feed transmission is enabled
09:14:14: Input 1: OpenNI sensor
09:14:14: Input 1: initting websockets
09:14:14: Input 1: connecting straight to: localhost:22223
09:14:14: Input 1: websocket connectingstate
09:14:14: Input 1: No websocket available yet, so sending message at a later time
09:14:14: Input 1: waiting for response
09:14:19: Input 1: websocket connectedstate
09:14:21: Input 1: Starting live sensor: PrimeSense SensorKinect
09:14:21: device status is 5
09:14:21: family 1
09:14:49: Input 1: No response from subroutine startlive within 30 seconds.
09:14:49: Input 1: This could be a problem in a sensor driver, sensor hardware or some permissions.
09:14:49: Input 1 quit normally.


#2

Follow this post … Why doesn't my Kinect for Xbox 360 work?

And this Documentation: Installing sensor drivers on Windows


#3

I appreciate it.
Seems everything is working now and I was able to set a scale and everything.

I have empties that are about the size of my model and close to the origin. I will need to fine tune the numbers but, playing with them I know that they do work and got it close.

Still a bit confused about everyone having that basic skeleton. But, seems I need to download it? I see comments and files about it. Just haven’t had the time.
If there are any further issues I’ll post.
I do appreciate the quick and wonderful feed back of this Dev team